Top & Bottom Labelling System
- The system is designed for labelling products on top and bottom.
- It is built in stainless steel and aluminium to fit into an industrial environment.
- The open construction gives the operator direct access to the dispensers and by the adjustable spindles, it is easy to find the correct position for both top and the bottom dispenser.
The system can run left to right or right to left. It can be equipped with other label dispensers. A seperate operator keypad with display, cen be mounted in any position within 5 mtrs from the dispenser. Hot Foil print system for print of bacth numbers, dates, etc Computer controlled print system for print of barcodes, text, graphics, etc. Counters. Variable speed controlled conveyor. Conveyor in other dimensions
|Speed:||TO SUIT PRODUCT|
|Web Width:||120MM TO 300MM|
|Label Detection:||By p.e. cell or miscroswitch OR ULTRASONIC|
|Label Roll:||Standard 270mmMax 400mm diameter|
|Label Core:||45mm or 76mm ID core|
|Drive:||programmable stepper drive. Thermal overload trip|
|Electrical Supply:||230v AC 50/60Hz|
|Conveyor:||To suit the product / application|
|Services:||single phase or three phase 230v AC, 50/50Hz, 600watt. Clean compressed air, as required|
|Hot Foil Coder:||(Optional): Print areas 12mm x 30mm 40mm or 40mm x 28mm. Variable temperature, dwell controls and ribbon indexing. Pneumatically operated.|
|Thermal Transfer:||min 30mmx40mm / max 105mmx128mm|
|Min Label Width:||15mm|
|Min Label Length:||15mm|
|Max Label Width:||300mm|
|Max Label Length:||500mm|