Matrix Cross Web Bottom Package Labeller
Description
- Patented Open IP65 design allowing water to drain
- Constructed completely from corrosion resistant materials
- Label dispensing speeds above 60 meters per minute
- Label placement accuarcy +/- 0.5mm
- Honeycomb tamp fin design for greater label control at higher speeds
- 320 x 240mm backlight waterproof touchscreen
- Ability to store 24 programs as standard
- Ability to apply up to 24 labels per row
- Ability to label up 12 rows per cycle
- On Screen fault system
- Password protected (optional) maintenance screen
- IP65 stainless steel control cabinet
- Computer adjusted photoeye sensitivity
- Heat sink cooling system without fans
- Fault signal output for host machine
- Home indexing each cycle for positive positioning
- Standard 350mm diameter label reel capacity
- 230mm diamater backing paper take up reel with quick release system for easy waste removal
- Wash Down Features
- Open design to prevent water from pooling
- Patented pererated rollers
- IP65 control panel incorporating a built in heater to control cabinet humidity
- Sealed stepper motors & fans
- Quick release IP65 control cables
- Easliy removed fan box for cleaning & label removal
- Maintenance Features
- Drive heads, tamp unit and motors are easily removed
- Wiring looms are exposed and fitted with quick release plugs for identification and replacement
- LED indicators on all actuators, proximity sensors and photosensors
- Interchangeable, modular stepper motor drives
- Fully adjsutable label speed, longitudal speed registrations and tamp time settings.
Options
Empty pack detection systems to save labels & downtime Ultrasonic label detect sensor for use with paper & plastic labels End of label supply waring light & fault signal In-line coding via Hot Foil or Thermal Transfer Printer Head to head labelling software Non-symmetrical label placement software
Technical Specifications
| Speed: | TO SUIT PRODUCT |
| Web Width: | 150MM TO 300MM |
| Label Detection: | p.e cell or ultrasonic |
| Label Roll: | 300mm -400mm |
| Label Core: | 45mm or 76mm I/D |
| Drive: | Stepper or servo |
| Electrical Supply: | 208-240 Volts AC 50/60Hz single phase 6.0 amps |
| Conveyor: | To suit the product / application |
| Services: | single phase or three phase 230v AC, 50/50Hz, 600watt. Clean compressed air, as required |
| Hot Foil Coder: | (Optional): Print areas 12mm x 30mm 40mm or 40mm x 28mm. Variable temperature, dwell controls and ribbon indexing. Pneumatically operated. |
| Thermal Transfer: | min 30mmx40mm / max 105mmx128mm |
| Min Label Width: | 20mm |
| Min Label Length: | 20mm |
| Max Label Width: | 300mm |
| Max Label Length: | 400mm |